The BM15A is a revolutionary nearfield monitor offering exceptionally
high performance. Its full range extended bass response makes it the
perfect nearfield monitor, particularly for commercial studios, project
studios and post production facilities.
The BM15A is a relatively large 2-way active system comprising of a
large 240mm (10") woofer, a special version of the Dynaudio ESOTEC soft
dome tweeter and an electronic phase-aligned crossover, which feeds the
build-in dual, high performance discrete MOSFET amplifiers.
The ESOTEC HF driver spells quality and headroom due to a dynamic
headroom of 1000W, and the 240mm (10") bass driver is world-renowned for
its 100mm (4") aluminium alloy voice coil, which outperforms most 300mm
(12") drivers in terms of power output and sheer punch.
The electronics offer complex protection circuitry helping to prevent
accidental damage to the drivers, while still providing maximum
transient response.
The BM15A monitor is front ported for powerful and extended low
frequency response, and the elegant matte cabinet has radius edges on
the front baffle to reduce boundary effects and improve the overall
sound quality.
Features
- Handcrafted aluminum drivers
- High-resolution 1.1" soft dome tweeter, pure aluminum voice coil
- 10" woofer, 4" pure aluminum voice coil
- 2 channel high grade 100/200Watt RMS amplifiers
- 124dB SPL peak power output
- Frequency response of 40Hz to 22kHz
- HF & LF analog trim filters
- System 2-way Active Nearfield Monitor
- Frequency Response (+/- 3 dB) 40 Hz - 22 kHz
- Max SPL 1m, pair (IEC Long Term) 124 dB RMS
- Max SPL 2m, 5.1 (IEC Long Term) 125,5 dB RMS
- Input level for 85 dB SPL @ 1m (+4/-10) -18 dBu RMS / -34 dBu RMS
- Input level for max peak SPL (+4/-10) +16 dBu peak / -1 dBu peak
- Power consumption Idle: 40 W / Max: 300 W
- Amplifier power Tweeter: 100 W / Woofer: 200 W
- Resonance Frequency 39 Hz
- Model BM15A
- Internal Cabinet Volume 27,5 liters
- Bass Principle Bass reflex
- Crossover Frequencies 1800 Hz
- Crossover Slope 30 dB/oct
- Tweeter Esotec 28 mm soft dome, rear chamber, Magnetic fluid. 4 mm die-cast alu front,
- Woofer 240 mm/9”, One-piece molded polyprop cone, 100 mm/4” pure alu voice coil
- Weight 18.6 kg / 41 lbs
- Dimensions (WxHxL) 290 x 454 x 388 mm / 11.4” x 17.9” x 15.2”
By Dynaudio: Warranty
Dynaudio Professional products are warranted to be free from defects in components and factory workmanship under normal use and service for a period of two (2) years when bought from a reseller within the EU.
Dynaudio Professional products are warranted to be free from defects in components and factory workmanship under normal use and service for a period of one (1) year when bought from a reseller outside the EU.
When failing to perform as specified during the warranty period we will undertake to repair, or at our option, replace this product at no charge to its owner, provided the unit is returned undamaged and shipping prepaid, to an authorized service facility or to the factory.
Dynaudio shall not be responsible for any incidental or consequential damages. Dynaudio's responsibility is limited to the product itself. Dynaudio assumes no responsibility for any loss due to cancellation of any events, or rent of replacement equipment or costs due to third party's or customer's loss of profit, or any other indirect cost or losses however incurred.
Dynaudio reserves the right to make changes or improvements in design or manufacturing without assuming any obligation to change or improve products previously manufactured and / or sold.
The product warranty is only valid in the country where the product was purchased.
Exceptions
Dynaudio will always follow the law of the respective markets should it differ from the policy stated above or the exceptions stated below.
This warranty shall be null and void, if the product is subjected to repair work or alteration by a person or facility other than those authorized by Dynaudio; mechanical damage including shipping accidents; war, civil insurrection, misuse, abuse, operation with incorrect AC voltage, incorrect connections, wrong accessories, incorrect use of accessories, operation with faulty associated equipment, exposure to inclement weather conditions and normal wear and tear.
Units, on which the serial number has been removed or defaced, are not eligible for warranty service.
|
