The Dynaudio tradition continues in the new II-series subs,
delivering Dynaudio's premium, professional sound quality and
performance. Dynaudio Professional II-series precision subwoofers are
made in Denmark using hand-crafted drivers that have made Dynaudio the
industry standard in studios the world over. The BM14S II is specifically designed to complement BM Compact
mkIII and BM5 mkIII monitors, adding extended bass in smaller mixing and
recording environments. From dubstep to metal, today's bass-dependent music requires a studio
subwoofer for monitoring. The Dynaudio BM14S delivers the punch and woof
that will inform your low-end mix decisions. Dynaudio is one of the
truly venerated names in professional studio monitoring.
The Dynaudio
tradition continues in the new II-series subs, delivering Dynaudio's
premium, professional sound quality and performance. Dynaudio
Professional II-series precision subwoofers are made in Denmark using
hand-crafted drivers that have made Dynaudio the industry standard in
studios the world over.
The BM9S II is specifically designed to
complement BM Compact mkIII and BM5 mkIII monitors, adding extended bass
in smaller mixing and recording environments, but it is a logical
expansion for most monitoring systems.
Features
- 12" woofer with pure aluminum voice coil. 300W @ 4 ohm
- Phase adjustment in 0° / 180°; Auto on/off, power LED;
- Selectable LFE or slave mode
- Discrete LFE input, slave output for linking
- Seamless adjustment of low-pass corner frequencies
- SAT/SUB high-pass adjustment: Flat, 60 Hz, 80 Hz.
- Closed cabinet for extremely precise low frequency reproduction
- Model BM14S II
- System Precision Subwoofer
- Frequency Response 18 Hz to 250 Hz (+/-3 dB)
- Inputs LFE/Slave, SAT/SUB, XLR right/left full bandwidth
- XLR Input impedance + branch 20 kOhm, – branch 10 kOhm
- Sensitivity 75 mVRMS to 5 VRMS, adjustable
- Max. Input voltage 10 VRMS
- Outputs Slave, SAT/SUB, XLR right/left, High-pass filtered
- XLR Output impedance 100 Ohm (each branch)
- XLR Pin-out 1: 0 / 2: + / 3: –
- Mode selector LFE, Slave (Phase and volume controls are bypassed in slave mode
- Phase adjustment 0° - 180°
- SAT High-pass Flat, 60 Hz, 80 Hz
- SUB Low-pass 50 Hz to 150 Hz
- Auto ON/OFF Automatic ON (LED green) when signal is detected at input Automatic mute (LED red) when no signal is detected for 15 to 20 min.
- Amplifier power 300 W, 4 Ohm
- Power consumption <16 W Standby, 325 W Max.
- Woofer 300 mm/12”, One piece molded MSP cone (Magnesium Silicate Polymer), 100 mm/4”, Pure aluminum voice coil
- Weight 21 kg. / 46.3 lbs
- Dimensions (WxHxL) 350 x 350 x 369.5 / 13.8” x 13.8” x 14.5”
By Dynaudio: Warranty
Dynaudio Professional products are warranted to be free from defects in components and factory workmanship under normal use and service for a period of two (2) years when bought from a reseller within the EU.
Dynaudio Professional products are warranted to be free from defects in components and factory workmanship under normal use and service for a period of one (1) year when bought from a reseller outside the EU.
When failing to perform as specified during the warranty period we will undertake to repair, or at our option, replace this product at no charge to its owner, provided the unit is returned undamaged and shipping prepaid, to an authorized service facility or to the factory.
Dynaudio shall not be responsible for any incidental or consequential damages. Dynaudio's responsibility is limited to the product itself. Dynaudio assumes no responsibility for any loss due to cancellation of any events, or rent of replacement equipment or costs due to third party's or customer's loss of profit, or any other indirect cost or losses however incurred.
Dynaudio reserves the right to make changes or improvements in design or manufacturing without assuming any obligation to change or improve products previously manufactured and / or sold.
The product warranty is only valid in the country where the product was purchased.
Exceptions
Dynaudio will always follow the law of the respective markets should it differ from the policy stated above or the exceptions stated below.
This warranty shall be null and void, if the product is subjected to repair work or alteration by a person or facility other than those authorized by Dynaudio; mechanical damage including shipping accidents; war, civil insurrection, misuse, abuse, operation with incorrect AC voltage, incorrect connections, wrong accessories, incorrect use of accessories, operation with faulty associated equipment, exposure to inclement weather conditions and normal wear and tear.
Units, on which the serial number has been removed or defaced, are not eligible for warranty service.
|
