|
|
|
|
Panamax M5300-PM 11 Outlet Clean Power Level 4 - Black (Only)
Improves Picture and Sound Quality Level
4 Power Cleaning and Filtration eliminates common symptoms of
contaminated power (including loss of detail, pops, hisses, hums and
visual artifacts) and allows your A/V equipment to perform up to its
full capability.
Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level Panamax’s
patent pending AVM™ circuitry continuously monitors the incoming power
as displayed on the digital voltmeter. In case of an undervoltage or an
overvoltage, a flashing red lightning bolt will be displayed in the
voltmeter, and power to the connected equipment is automatically turned
off if either of these conditions is detected. When voltage returns to a
safe level, power to the equipment is automatically reconnected.
Reduces Cross-Contamination Between Components The
M5300-PM is designed to provide noise isolation between 5 isolated
outlet banks (including 1 bank with 2 high current outlets) so that any
noise created by an A/V component cannot contaminate the power going to equipment plugged into another outlet bank. Clean Power Level 4 Improves
picture and sound quality by eliminating noise across the entire AC
bandwidth. 40% more efficient at eliminating noise than Clean Power
Level 3.
AVM (Automatic Voltage Monitoring) Protects equipment against prolonged over/under voltages by disconnecting the power and reconnecting it when safe power returns.
High Current Outlets 2 outlets for equipment with high power demands (Amps/Subwoofers).
USB Charger Convenience charger for mp3 players, cell phones, and other small electronics.
Gaming LAN Port Easy access to LAN port on front panel. Perfect for online gaming.
5 Isolated Outlet Banks Isolating outlet banks from one another prevents noise contamination between components.
12 Volt Trigger Allows source equipment to activate or deactivate the switched outlets on the M5300-PM.
Power Sequencing Guards against blown fuses and potentially damaging speaker thump by automatically powering outlets on and off in sequence.
11 Outlets 5 Always On, 4 Switched, 2 Switched High Current.
- General
Weight 12.8 lbs. Rack Ears Included Dimensions 17 in. W x 12.75 in. D x 3.5 in H, (4.1 in. Including feet)
AC Power Under-voltage shutoff 90 VAC ± 2 VAC UL1449 Suppression Rating 330V Total Current Capacity 15 A Thermal Fusing Yes Protection Modes L-N, L-G, N-G Power Cord 10 ft detachable Peak Impulse Current 72,000 Amps Over-voltage shutoff 142 VAC ± 8 VAC Line Voltage 120V, 60Hz Initial Clamping Level 200V Energy Dissipation 2125 Joules Catastrophic Surge Circuit Yes
EMI/RFI Noise Filtration Banks 1, 2, 3, 4 80 db, 100 KHz − 2 MHz Bank 5, High Current Outlets 60 db, 100 KHz − 2 MHz
DC Trigger Input Voltage and Polarity 3 - 24V DC, bidirectional Jacks 3.5mm (1/8") mono mini-plug Current Requirement 4.6 mA @3V, 58 mA @24V
DC Trigger Output Positive = Tip, Negative = Ring Pass through no delay
LAN Circuits Wires Protected 8-Wires Connectors RJ-45 Compatibility 10/100bT Clamping Level 52V
USB Circuit Power Delivery 500 mA @ 5VDC Jacks USB-A
Telco Protection Wires Protected 2-Wire, Pins 4 & 5 Suppression Modes Metallic & Longitudinal Fuseless/Auto-resetting Yes Connectors RJ-11 Clamping Level 260V Capacitance 30pf (approx.)
Universal Coax Protection Shielded Yes Insertion Loss < 0.5 dB HD 1080 i/p Ready Yes Frequency Range 0 MHz - 2.2 GHz Connections Female "F", Gold Plated Clamping Level 75V Bidirectional YES
Click here for full warranty details and restrictions.
|
|
|
|
|
|
|