Panamax M5300-PM 11 Outlet Clean Power Level 4 - Black (Only)
Improves Picture and Sound Quality
Level
4 Power Cleaning and Filtration eliminates common symptoms of
contaminated power (including loss of detail, pops, hisses, hums and
visual artifacts) and allows your A/V equipment to perform up to its
full capability.
Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level
Panamax’s
patent pending AVM™ circuitry continuously monitors the incoming power
as displayed on the digital voltmeter. In case of an undervoltage or an
overvoltage, a flashing red lightning bolt will be displayed in the
voltmeter, and power to the connected equipment is automatically turned
off if either of these conditions is detected. When voltage returns to a
safe level, power to the equipment is automatically reconnected.
Reduces Cross-Contamination Between Components
The
M5300-PM is designed to provide noise isolation between 5 isolated
outlet banks (including 1 bank with 2 high current outlets) so that any
noise created by an A/V component cannot
contaminate the power going to equipment plugged into another outlet bank.
Clean Power Level 4
Improves
picture and sound quality by eliminating noise across the entire AC
bandwidth. 40% more efficient at eliminating noise than Clean Power
Level 3.
AVM (Automatic Voltage Monitoring)
Protects equipment against prolonged over/under voltages by disconnecting the power and reconnecting it when safe power returns.
High Current Outlets
2 outlets for equipment with high power demands (Amps/Subwoofers).
USB Charger
Convenience charger for mp3 players, cell phones, and other small electronics.
Gaming LAN Port
Easy access to LAN port on front panel. Perfect for online gaming.
5 Isolated Outlet Banks
Isolating outlet banks from one another prevents noise contamination between components.
12 Volt Trigger
Allows source equipment to activate or deactivate the switched outlets on the M5300-PM.
Power Sequencing
Guards against blown fuses and potentially damaging speaker thump by automatically powering outlets on and off in sequence.
11 Outlets
5 Always On, 4 Switched, 2 Switched High Current.
General
Weight 12.8 lbs.
Rack Ears Included
Dimensions 17 in. W x 12.75 in. D x 3.5 in H, (4.1 in. Including feet)
AC Power
Under-voltage shutoff 90 VAC ± 2 VAC
UL1449 Suppression Rating 330V
Total Current Capacity 15 A
Thermal Fusing Yes
Protection Modes L-N, L-G, N-G
Power Cord 10 ft detachable
Peak Impulse Current 72,000 Amps
Over-voltage shutoff 142 VAC ± 8 VAC
Line Voltage 120V, 60Hz
Initial Clamping Level 200V
Energy Dissipation 2125 Joules
Catastrophic Surge Circuit Yes
EMI/RFI Noise Filtration
Banks 1, 2, 3, 4 80 db, 100 KHz − 2 MHz
Bank 5, High Current Outlets 60 db, 100 KHz − 2 MHz
DC Trigger Input
Voltage and Polarity 3 - 24V DC, bidirectional
Jacks 3.5mm (1/8") mono mini-plug
Current Requirement 4.6 mA @3V, 58 mA @24V
DC Trigger Output
Positive = Tip, Negative = Ring
Pass through no delay
LAN Circuits
Wires Protected 8-Wires
Connectors RJ-45
Compatibility 10/100bT
Clamping Level 52V
USB Circuit
Power Delivery 500 mA @ 5VDC
Jacks USB-A
Telco Protection
Wires Protected 2-Wire, Pins 4 & 5
Suppression Modes Metallic & Longitudinal
Fuseless/Auto-resetting Yes
Connectors RJ-11
Clamping Level 260V
Capacitance 30pf (approx.)
Universal Coax Protection
Shielded Yes
Insertion Loss < 0.5 dB
HD 1080 i/p Ready Yes
Frequency Range 0 MHz - 2.2 GHz
Connections Female "F", Gold Plated
Clamping Level 75V
Bidirectional YES
- General
Weight 12.8 lbs.
Rack Ears Included
Dimensions 17 in. W x 12.75 in. D x 3.5 in H, (4.1 in. Including feet)
AC Power
Under-voltage shutoff 90 VAC ± 2 VAC
UL1449 Suppression Rating 330V
Total Current Capacity 15 A
Thermal Fusing Yes
Protection Modes L-N, L-G, N-G
Power Cord 10 ft detachable
Peak Impulse Current 72,000 Amps
Over-voltage shutoff 142 VAC ± 8 VAC
Line Voltage 120V, 60Hz
Initial Clamping Level 200V
Energy Dissipation 2125 Joules
Catastrophic Surge Circuit Yes
EMI/RFI Noise Filtration
Banks 1, 2, 3, 4 80 db, 100 KHz − 2 MHz
Bank 5, High Current Outlets 60 db, 100 KHz − 2 MHz
DC Trigger Input
Voltage and Polarity 3 - 24V DC, bidirectional
Jacks 3.5mm (1/8") mono mini-plug
Current Requirement 4.6 mA @3V, 58 mA @24V
DC Trigger Output
Positive = Tip, Negative = Ring
Pass through no delay
LAN Circuits
Wires Protected 8-Wires
Connectors RJ-45
Compatibility 10/100bT
Clamping Level 52V
USB Circuit
Power Delivery 500 mA @ 5VDC
Jacks USB-A
Telco Protection
Wires Protected 2-Wire, Pins 4 & 5
Suppression Modes Metallic & Longitudinal
Fuseless/Auto-resetting Yes
Connectors RJ-11
Clamping Level 260V
Capacitance 30pf (approx.)
Universal Coax Protection
Shielded Yes
Insertion Loss < 0.5 dB
HD 1080 i/p Ready Yes
Frequency Range 0 MHz - 2.2 GHz
Connections Female "F", Gold Plated
Clamping Level 75V
Bidirectional YES
Full 3-year warranty by Panamax
|
