 |
 |
 |
|
The Furman PL-8 II Power Conditioner is what you
need to protect your valuable equipment from power spikes and sags. An
advanced Series Multi-Stage Protection Plus (SMP+) circuit provides
rock-solid, maintenance-free extreme surge suppression with zero ground
contamination thanks to Linear Filtering Technology (LiFT). Unit has 8
rear-panel outlets and one front-panel outlet, a 15-amp rating with
circuit breaker, retractable LED rack lights with on/off/dimmer control,
BNC back panel connector for gooseneck lamp with front-panel switch,
and a front-panel circuit breaker. Fits in one rack unit and comes with a
10', 14-gauge, heavy-duty power cable and 3-year limited warranty.
Furman's
Series II power conditioners feature the Series Multi-Stage Protection
(SMP) circuit and the exclusive Linear Filter Technology (LiFT). The
maintenance-free SMP surge suppression handles the most extreme
transient voltage spikes are safely absorbed, clamped, and dissipated
without destruction of the circuit. LiFT takes ensures optimal
performance through linear filtering with no leakage to ground,
protecting the audio and video quality of your signal.
Series II
units have super-bright, long-life, retractable LED rack lights that
produce virtually no heat and provide an extremely long life span. There
is an on/off/dimmer control for the lights. A BNC back panel connector
will accommodate a gooseneck lamp for rear-rack illumination. A front
panel switch controls the gooseneck's operation. The Series II units
occupy one rack unit space each and have a convenient front-panel
mounted outlet.
A master switch controls operation of the rear
outlets, and the front-panel circuit breaker can be quickly and easily
reset should the unit be overloaded. The Series II conditioners come
with a 10', 14-gauge, heavy-duty power cable.
- Maintenance-free surge suppression
- Series Multi-Stage Protection Plus (SMP+) circuit with extreme voltage shutdown
- LiFT (Linear Filtering Technology) with zero ground contamination
- 8 rear-panel outlets and one front-panel outlet
- 15 amp rating, with circuit breaker
- Retractable LED rack lights with on/off/dimmer control
- BNC back panel connector for gooseneck lamp with front-panel switch
- Master switch control of rear outlets
- Front-panel circuit breaker
- One rack unit space
- 10', 14-gauge, heavy-duty power cable
- Dimensions: 1.75" H x 19" W x 10.5" D
- Weight: 11 lbs. (5 kg)
- Construction: Steel chassis, .125" brushed and black anodized aluminum front panel; glass epoxy printed circuit boards
- Current rating: 15 amps
- Operating Voltage: 90 to 140 VAC
- Over Voltage Shutdown: 140 VAC typically
- Voltmeter Accuracy: PL-PLUS II only: ±2 VAC, calibrated with internal trimpot adjustments
- Spike Protection Modes: Line to neutral, zero ground leakage
- Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps, 133 VAC RMS (tested to UL-1449 and USA/CIDA A-1-1, 6,000 VAC @ 3,000 Amps)
- Response time: 1 nanosecond
- Maximum surge current: 6,500 amps
- Noise attenuation: 10dB @ 10kHz, 40dB @ 100kHz, 100dB @ 10MHz—Linear attenuation curve
- from 0.05-100 Ohms line impedance
- Power consumption: 6W
- Safety Agency Listings: CE, NRTL-C
By Furman Sound:
What is the warranty coverage period on new Furman products?
Furman has Limited Warranty terms of one, three or five years (depending on the model). This warranty will cover
defects in materials or workmanship on registered units. Our warranty
covers parts and labor, with the term measured from the date of purchase
of the new unit by the original owner. The warranty is not
transferable.
How can I know if my unit is “in-warranty”?
SAVE YOUR SALES RECEIPT!
The receipt is your proof of purchase and confirms the product was
purchased at an authorized Furman dealer. It will need to be submitted
to Furman in order to process any warranty claims. Proof of purchase is
also required for any connected equipment warranty claim. No connected
equipment claim will be considered without a valid sales receipt.
|
|
|
 |
|
 |
|
