|
|
|
|
The Drumometer Model II measures a drummer's technical accuracy, hand or
foot speed, and endurance by counting the total number of strokes a
drummer can play within a preset time (1 to 900 seconds). It's a very
progressive practice tool to help develop a relaxed playing style,
strengthen endurance, and improve your sense of timing. The Drumometer
is an effective teaching device for any drum instructor as students have
a tangible goal to surpass.
You can use the Drumometer as a stand-alone device or by incorporating it with other devices:
- A direct connection to the Drum-o-meter pad or any internally triggered electronic drum pad.
- By attaching the Drum-o-meter Trigger to a tunable practice pad.
- By attaching the Drum-o-meter Trigger to a heavily dampened drum.
The Drum-O-Pad (or direct connection via the Drum-O-Trigger) carries
an electronic signal to the Drumometer when the practice pad (or drum)
is struck. The timer immediately starts counting down and the Drumometer
records each drum stroke until the desired time has elapsed. When the
timer reaches zero, the buzzer rings signaling that the counter has
stopped and the total number of strokes are displayed. Press the red
Reset button or tap the remote footswitch to reset the counter to zero
and the desired time.
A standard metronome is an invaluable tool to develop timing, meter,
and accuracy with subdivisions but it does not correct or gauge
technical accuracy. This can only be measured by creating consistent and
relaxed strokes and the Drumometer will show you exactly how well a
pattern is being executed. The Drumometer display allows you to
visualize your strokes in real time giving you immediate feedback during
your practice routine. The same principle holds true for
double-strokes, rudiments, or any pattern you might choose.
- A metronome (30 - 300 b.p.m.), internal speaker, headphone jack, and volume control.
- ZAT™ Zero Alert Tone™ - This is a short tone when the Drumometer timer reaches zero.
- Improved Drumometer timer range of 900 seconds (15 minutes).
- Footswitch included for remote footswitch reset function.
- Remembers last timer and metronome settings.
- Enhanced counter range now capable of 99,999 drum strokes.
- Easy accessible battery compartment.
- The Drumometer Model II Package includes:
- Drumometer™ Model II
- Drum-O-Pad™ (Internally Triggered Electronic Drum Pad)
- Drum-O-Trigger™ (Electronic Drum Trigger)
- Remote Footswitch
- Instrument Cable with male 1/4” connectors
- (1) piece of Velcro® and (1) piece of two-sided tape
- (1) 6mm wing nut
- (1) 8mm wing nut
- (2) AA Batteries
The Pearl Lifetime Warranty is a statement of confidence to our
customers to the reliability of Pearl products. Pearl drums, stands and
hardware are designed and manufactured to the highest standards in
quality, style, appearance and playing performance. This lifetime
warranty reflects a tradition of excellence and a commitment to superior
engineering and craftsmanship dedicated to you, the drummer. The Pearl
lifetime warranty is our pledge to you that we will proudly stand behind
our product for as long as you own it. Buy it once, play it for life.
Lifetime Warranty
- Drum Set/Concert wood and metal shells for the Lifetime of the Original Owner.
- Foot pedals, hi-hat stands, cymbal stands, boom cymbal stands, snare
drum stands, floor-standing tom stands, floor- standing cymbal/tom
stands, concert stands, racks and rack accessories, cymbal holders and
multi-clamps for the Lifetime of the Original Owner. Some exceptions
apply.
- Drum Set claws, tension rods, swivel nuts, spurs, tom brackets, tom
holders, strainers, and nuts and bolts for the Lifetime of the Original
Owner.
- Rotationally molded cases for the Lifetime of the Original Owner.
- The LIFETIME WARRANTY applies to the aforementioned Pearl products purchased from June 15, 2009.
3 Years
2 Years
- All Pearl Percussion products (except rims lugs, and tuning plates which have a 1 year warranty).
1 Year
- SoundCheck drums, stands, pedals, hardware, and parts.
- Covered and lacquered finishes on all Pearl drums.
- RH-2000 Remote Hat cable.
- Collar Joint on all Pearl drum thrones.
- Gas Cylinder on the D-3000TC throne.
- Marching claws, tension rods, swivel nuts, strainers, and nuts and bolts.
- Marching carriers and marching carrier parts.
- Tru-Trac electronic drum pads and rubber pad surfaces.
- R.E.D. BOX electronic drum module, cables, and junction boxes.
- e-Pro Live metal and plastic cymbals.
- THRONE THUMPER and THRONE THUMPER amplifier.
- PRECISION DRUM MONITOR headphones.
- Snare Kits, Bell Kits, Percussion Learning Centers and their corresponding bags and cases.
- All ADAMS products.
- Taiko heads.
This Warranty Does Not Cover
- Normal wear and tear.
- Improper assembly.
- Improper follow-up maintenance or repair.
- Installation of non-genuine Pearl parts or components.
- Instruments that have been sold as "B-Stock", sold as second-hand, or resold contrary to US export regulations.
- Instruments that have been altered, modified or have been damaged through misuse, negligence, improper operation or accidents.
- Instruments subjected to abnormal strain, neglect, abuse,
modification or exposure to extreme variances in temperature or
humidity.
- Instruments whose trademark, name or identification number has been changed or removed.
- Drum hardware and stands plated in Black Chrome, Gold, Satin Chrome, and Black Nickel.
- Drum hardware and stands finished in Black or White Electro-coat.
- Consumables such as but not limited to: heads sticks, brushes,
beaters, springs, straps, slings, wire snares, cable snares, gut snares,
cords/straps, cymbals, bass drum hoop protectors, wheels and casters.
- The playing surface on Pearl Percussion cajons.
- The heads on the Pearl Percussion Fun Drum.
Owner’s Responsibility It is important that the
owner/user be familiar with the proper maintenance and use of their
Pearl instrument. Keep this warranty and proof of purchase in a safe
place. Be prepared to provide purchase information to avoid undue
difficulties in determining eligibility for warranty protection. If any
service is not performed by Pearl, it will terminate this warranty.
To Obtain Warranty Service Warranty service may
be obtained by first notifying the Pearl dealer from which the product
was originally purchased. Upon notification, the Pearl dealer must
obtain Return Authorization from the Pearl Customer Service Department.
This number must be written plainly on the outside of the package or
the returned shipping carton will be refused. Returned merchandise must
be accompanied by a copy of the original sales receipt. All freight
and insurance must be prepaid by the original owner. Pearl will stand
return freight, provided the defect is adjudged to be covered by
warranty. Merchandise found to be not covered by warranty will be
returned freight collect.
Warranty Limitations This Limited Warranty is
exclusive and made in lieu of all other warranties, and all implied
warranties, including without limitation any warranties of
merchantability or of fitness for a particular purpose which are hereby
expressly disclaimed. In no event will responsibility be accepted for
incidental or consequential damages of any nature whatsoever. Some
states do not allow limitation on how long an implied warranty may last.
Therefore, the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to stat
|
|
|
|
|
|
|