Ultra-small, high performance dynamic harmonica microphone.
The FireBall™ is designed for harmonicas (both
diatonic and chromatic) and beatbox. Clear, accurate and capable of
handling SPLs in excess of 140 dB without distortion, the FireBall™ is
ideally suited for both live stage and studio recording applications.
The
FireBall™ mic has a smooth, uniform frequency response of 50 Hz - 16
kHz, and a cardioid pickup pattern for isolation and feedback control.
It is lightweight, compact and comfortable to hold. The FireBall™ is
manufactured with a precision machined aluminum body, steel mesh grill
and unique three stage marbled anodized finish.
Because
the FireBall™ is a low impedance microphone, when using with a guitar
amplifier, a quality, low-high impedance transformer (see T50k) is
required.
Designed, machined, assembled and test by Audix in the USA.
The Audix FireBall is a dynamic microphone with sleek styling and a
unique design. Well-suited for both chromatic and diatonic harmonicas,
the FirebBall mic features a dent-resistant round grill with a deep red
internal pop filter. Contoured to fit comfortably within the palm of
your hand. A full-sized dynamic capsule featuring VLM (Very Lo Mass)
technology provides big, full-bodied sound that is both clean and
accurate.
The FireBall is resistant to feedback and is capable of
handling sound pressure levels in excess of 140dB without distortion.
Made to be cupped, this harmonica microphone will operate as if in an
open-air environment even under the most demanding conditions.
A smooth
and uniform frequency response of 50Hz-16kHz and a cardioid polar
pattern allow the FireBall to focus on the particular instrument being
miked without picking up other instruments or ambient noise.CNC machined
out of a solid bar of aircraft-grade aluminum, it then goes through an
elaborate 3-stage anodizing process for a distinctive look. Each
FireBall is attractively laser etched with its name and serial number.
Includes a heavy-duty mic clip and carrying pouch.
- Transducer Dynamic, Moving Coil
- Polar Pattern Cardioid
- Frequency Response 50Hz to 16kHz
- Dynamic Range (Typical) not specified by manufacturer
- Signal-to-Noise Ratio not specified by manufacturer
- Maximum Input Sound Level > 140dB
- Power Requirements Dynamic microphone - no power required
- Output Impedance 150 ohms balanced
- Output Connectors 3-pin XLR
- Pad No
- Low Frequency Roll-Off No
- Dimensions 3" (76mm) (Length)
- Weight 4.5oz (127.5 grams)
- Download spec sheet
Audix Limited Warranty Audix guarantees our products to be free of manufacturing defects as follows: 5 years for dynamic microphones. 3 years for condensers and wireless products.
Products found to be malfunctioning due to a manufacturing defect will be repaired or replaced at no charge to the customer. All other repairs will result in a nominal service charge
|